STANDART İKİ KOLLU ÇEKTİRME, 65 MM SKF

STANDART İKİ KOLLU ÇEKTİRME, 65 MM SKF
Kategori
Mekanik Aletler
Marka
SKF
Stok Kodu
SKF.TMMP2X65
Ürün Bilgisi
Ürün Bilgisi
Versatile two and three arm mechanical pullersSKF Standard Jaw Pullers TMMP seriesOne of the most common ways to dismount small to medium size bearings is to use a basic mechanical puller. Using an SKF puller helps to safeguard against damage to the bearing or to the bearing seating during dismounting. SKF Jaw pullers allow for easy and safe puller operation.• Range of five different jaw pullers with two or three arms• Maximum nominal span from 65 to 300 mm (2.6 to 11.8 in.)• Cone system for automatic centring and secure positioning of arms• Strong springs keep arms apart for easy operation• Hardened, high quality carbon steel
www.mapro.skf.com · skf.com/mount · skf.com/lubricationDesignationTMMP 2x65TMMP 2x170TMMP 3x185TMMP 3x230TMMP 3x300No. of arms22333Width of grip15–65 mm (0.6–2.6 in.)25–170 mm(1.0–6.7 in.)40–185 mm(1.6–7.3 in.)40–230 mm(1.6–9.1 in.)45–300 mm (1.8–11.8 in.)Effective length of arm60 mm (2.4 in.)135 mm (5.3 in.)135 mm (5.3 in.)210 mm (8.3 in.)240 mm (9.4 in.)Claw height8 mm (0.31 in.)9 mm (0.35 in.)9 mm (0.35 in.)9 mm (0.35 in.)11 mm (0.43 in.)Maximum withdrawal force6,0 kN (0.7 US ton)18,0 kN (2 US ton)24,0 kN (2.7 US ton)34,0 kN (3.8 US ton)50,0 kN (5.6 US ton)Weight0,5 kg (1.2 lb)2,1 kg (4.7 lb)2,9 kg (6.4 lb)5,8 kg (13 lb)8,6 kg (19 lb)Technical data® SKF is a registered trademark of the SKF Group.© SKF Group 2014The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.PUB MP/P8 13069 EN · December 2014
Yorumlar
Bu ürüne ilk yorumu siz yapın!
Yorum Yaz
Taksit Seçenekleri
Önerileriniz
Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.
STANDART İKİ KOLLU ÇEKTİRME, 65 MM SKF SKF.TMMP2X65
STANDART İKİ KOLLU ÇEKTİRME, 65 MM SKF

Tavsiye Et

*
*
*
IdeaSoft® | E-Ticaret paketleri ile hazırlanmıştır.