TMMD 100 İÇİN MİL, SOMUNLU, BÜYÜK SKF

TMMD 100 İÇİN MİL, SOMUNLU, BÜYÜK SKF
Kategori
Mekanik Aletler
Marka
SKF
Stok Kodu
SKF.TMMD100-S2
Ürün Bilgisi
Ürün Bilgisi
SKF Blind housing pullers
2Selection chart – SKF Blind pullersDesignationBearing bore diameter (d) Effective arm lengthTMMD 10010–100 mm (0.4–3.9 in.)135–170 mm (5.3–6.7 in.)TMBP 20E30–160 mm (1.2–6.3 in.)547 mm (21.5 in.)The SKF Deep Groove Ball Bearing Puller Kit TMMD 100 allows quick and easy dismounting of SKF Deep Groove Ball Bearings with an interference fit on both rings.The SKF Blind Housing Puller Kit TMBP 20E is an adapter type puller for dismounting deep groove ball bearings in blind housings with shaft dimensions between 30 mm and 160 mm (1.18–6.3 in.). The use of extension rods allows a long reach of up to 547 mm (21.5 in.).60.. series62.. series63.. series64.. series16… series6021–60326213–62306309–63206406–641816026–16032Suitability chartSKF TMBP 20E is suitable for dismounting the following deep groove ball bearingsRemove seal and open selected section of ball cage. Clean the swarf out. Insert appropriate bearing adapter and rotate it 90° ensuring positive grip within the bearing race. Insert the second adapter into prepared area diametrically opposed.Removes bearing without dismantling machinerySKF Blind Housing Puller Kit TMBP 20E• Allows a wide of range of deep groove ball bearings to be dismounted • Ball adapters designed for a long service life • Spanner stop function on spindle for easy and safe handling• Self-locking nose piece helps minimise damage to shaft, and improves puller stability
3Easy dismounting of bearings in blind housings SKF Deep Groove Ball Bearing Puller Kit TMMD 100The puller is suitable for use in both blind housings and shaft applications. The SKF TMMD 100 is suitable for dismounting up to 71 different SKF deep groove ball bearings, with shaft diameters ranging between 10 and 100 mm (0.4–3.9 in.).• The claws are designed to precisely fit in the bearing’s raceway, providing a good grip, thereby allowing high dismounting forces• Each puller arm is fitted with a spring for easy installation• The claw has been designed to allow easy insertion• The hexagon head of the spindle is designed to prevent the spanner sliding down the spindle during dismounting• The puller can also be used to remove sealed bearings from blind housings, after the seal has been removedBearing selection chart includedThe rubber cap allows easy and quick attachment of the arms to the spindle. It also prevents the puller arms from detaching from the spindle during operationThe springs enable easy insertionBearing designationShaft diameter6000–602010–100 mm (0.4–3.9 in.)6200–621810–90 mm (0.4–3.5 in.)6300–631310–65 mm (0.4–2.6 in.)6403–641017–50 mm (0.7–2.0 in.)62/22, 62/28, 63/22, 63/2822, 28, 22, 28 mm (0.9, 1.1, 0.9, 1.1 in.)16002, 16003, 1601115, 17, 55 mm(0.6, 0.7, 2.2 in.)16100, 1610110, 12 mm(0.4, 0.5 in.)Suitability chartThe SKF TMMD 100 suits the following bearing series and sizes:
www.mapro.skf.com · skf.com/mount · skf.com/lubricationTechnical data – SKF Deep Groove Ball Bearing Puller KitDesignationTMMD 100Kit contents3 ™ puller arm A1–135 mm (5.3 in.)3 ™ puller arm A2–135 mm (5.3 in.)3 ™ puller arm A3–137 mm (5.4 in.)3 ™ puller arm A4–162 mm (6.4 in.)3 ™ puller arm A5–167 mm (6.6 in.)3 ™ puller arm A6–170 mm (6.7 in.)2 ™ spindle and nut1 ™ handleEffective arm length135–170 mm (5.3–5.7 in.)Dimensions of case530 ™ 85 ™ 180 mm (20.9 ™ 3.4 ™ 7.0 in.)Weight3,6 kg (7.9 lb)DesignationTMBP 20EKit contents6 adapters sizes (2 pcs each)2 main rods (with nut support rings and nuts)4 extension rods Spindle Spindle nose pieceBeamEffective arm length147–547 mm (5.8–21.5 in.)Maximum pulling force55 kN (6.2 US ton)Dimensions of case 530 ™ 85 ™ 180 mm (20.9 ™ 3.4 ™ 7.0 in.)Weight6,5 kg (14.3 lb)Technical data – SKF Blind Housing Puller Kit® SKF is a registered trademark of the SKF Group.© SKF Group 2014The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.PUB MP/P8 13076 EN · October 2014
Yorumlar
Bu ürüne ilk yorumu siz yapın!
Yorum Yaz
Taksit Seçenekleri
Önerileriniz
Bu ürünün fiyat bilgisi, resim, ürün açıklamalarında ve diğer konularda yetersiz gördüğünüz noktaları öneri formunu kullanarak tarafımıza iletebilirsiniz.
Görüş ve önerileriniz için teşekkür ederiz.
TMMD 100 İÇİN MİL, SOMUNLU, BÜYÜK SKF SKF.TMMD100-S2
TMMD 100 İÇİN MİL, SOMUNLU, BÜYÜK SKF

Tavsiye Et

*
*
*
IdeaSoft® | E-Ticaret paketleri ile hazırlanmıştır.